Selenite is a crystal that can be used for a variety of purposes. This post will discuss how you can use selenite to charge crystals.
If you’re looking for an alternative way to charge your stones, this may be the perfect option. First, you must know how many selenites you need to charge your crystals.
The number of selenites will depend on the size and weight of the crystal.
For example, one or two medium-sized selenites will be enough to charge up a few smaller crystals at once.
You should also take into consideration the type of crystal being charged.
For example, if you have quartz (which requires more energy) but only have amethyst (which requires less energy), then you would want to balance out the amount of each stone so as not to overcharge any particular type of stone.
When placing the crystals on top of the selenite, ensure they are spaced evenly around the stone so they all receive equal energy.
About Selenite
Selenite is a mineral that can be found in the form of white tabular or semi-translucent crystals.
It is named after the Greek word for moon (Selene).
As it relates to the crystal healing benefits, Selenite is an excellent tool for opening up one’s intuitive abilities.
Selenite is often used to support intuition, astral travel, lucid dreaming, and out-of-body experiences.
For this reason, many people like to charge their crystals using Selenite by placing them near the stone while visualizing their intention.
There are different ways you can use Selenite to charge your crystals:
- Place your crystals in a bowl with Selenite;
- Place Selenite around your stones;
- Pour water over the stones;
- Let them sit on top of an open bowl filled with Selenite.
Draw circles around each stone with the point of a selenite wand. Light candles on either side of the stones and allow them to burn for about 30 minutes before blowing them out.
You may also wish to say a prayer at this time or ask questions aloud from any spiritual guides who might be present.
Selenite is most commonly found in the form of white tabular or semi-translucent crystals. They are typically very thin and brittle, making them easy to break.
Selenite has been known to protect against electromagnetic radiation such as X-rays and gamma rays.
In some cultures, Selenite is believed to bring peace.
Some believe that Selenite provides protection and guidance when needed. Selenite is said to protect from lightning storms when placed outside the home.
Selenite is considered a soft stone, meaning it will scratch easily.
Does Selenite charge other crystals?
Selenite is a standard crystal that can be used to charge other crystals.
Selenite is also a good stone for cleansing crystals of negative energies, which makes it an ideal choice for charging your crystals.
As the mineral form of salt, selenite has purifying properties that help rid crystals of unwanted energy.
To do so, place the crystal inside the selenite’s palm or cradle it in its arms to cleanse away all negative feelings or thoughts.
You can also bury your crystal in natural sand or dirt as this will help rid the stone of any bad vibes and replenish its strength with minerals from the earth.
The following way to charge your crystals using Selenite is by putting them under sunlight or moonlight.
If you are unsure of how much time you should spend outside, try leaving them there overnight and see what happens.
Can I use Selenite to charge any type of crystal?
Selenite is often used as a crystal healing tool. It’s believed that Selenite helps to remove negativity, which can be detrimental to our health and well-being.
Use this beautiful mineral to charge crystals by placing them in or on the stone.
You can also use Selenite to cleanse your crystals.
Simply place your crystals in the selenite for 15 minutes and then wipe it off with a cotton ball dipped in water, alcohol, or saltwater solution (1/4 teaspoon of salt dissolved in 1/4 cup of distilled water).
You can use Selenite to charge any type of crystal.
Place your crystal near the Selenite for 10-15 minutes or longer.
Make sure you don’t leave crystals exposed to Selenite for more than 24 hours because exposure may cause cracks in the crystal and damage its quality.
Selenite can also cleanse other stones, such as amethyst, quartz, calcite, jade, and fluorite.
How to charge crystals using Selenite? 5 Safe ways
Crystals are said to hold healing energies and magical powers, which makes them essential tools in your spellcasting arsenal.
However, before you can harness the power of these stones, you have first to charge them using a technique called crystal charging.
This process increases the effectiveness of your spells and helps you manifest your desires faster and more efficiently.
To charge crystals with Selenite, follow these steps to ensure you do it safely and effectively!
1) Place the crystal in sunlight for an hour with Selenite
Selenite is an excellent crystal for charging crystals. Simply place the crystal in sunlight for an hour with a piece of Selenite nearby.
The sun’s energy will transfer into the crystals, amplifying their power.
You can also use Selenite at night by placing it near the crystals as they charge up from moonlight.
If you don’t have access to sunlight or moonlight, another way to charge your crystals is to soak them in sea salt water.
The salt water’s natural vibrations are conducive to enhancing crystal energies.
2) Place the crystal on top of selenite for three days
You need to place the crystal on top of selenite for three days to charge it.
It is important not to touch the crystal during this time because that will affect how well your selenite absorbs energy from the stone.
To make sure the crystal doesn’t roll off, it’s best to place a small object on each side to keep it in place.
You may also want to cover your selenite with cloth or paper towel, so it does not absorb dirt from the surface below.
3) Place it in a running stream for an hour with Selenite
Selenite is a crystal that can be used to charge other crystals. Place the crystals in a running stream with a piece of Selenite for an hour.
The water will carry the energy from Selenite into your crystals.
You could also place them under direct sunlight or bury them near the roots of a tree. You can also put them in full moonlight or submerge them in saltwater overnight.
All these methods are effective ways to charge crystals using Selenite.
4) Put it in a bowl of spring water with Selenite
Selenite is an excellent stone for clearing and purifying energy and aligning your chakras.
To charge crystals using Selenite, place the crystal you wish to charge in a bowl of spring water with Selenite.
Next, set an intention (e.g., protection) and let the crystal soak in the water overnight before removing it from the bowl.
Make sure the crystal isn’t touching any part of the selenite.
You can also leave them in contact for up to two hours, but this method may require more than one session if you want to charge multiple crystals simultaneously.
5) Use your Reiki skills
Charging crystals with selenite is a great way to infuse your crystals with the healing energy of this mineral.
Selenite is also known for purifying an area and removing negative energies.
The best way to charge your crystal is by simply placing it on top of a Selenite stone or putting it in contact with the stone.
Does Selenite need to be cleansed?
Selenite does not need to be cleansed because it is a naturally occurring mineral used for centuries.
It is believed to cleanse the body, promote peace of mind, and even help with insomnia.
You can charge your crystals by placing them on top of or next to Selenite for a few minutes.
Selenite does not need to be cleansed, but it is still a good idea.
There are many ways that you can cleanse your Selenite.
You can use water, sunlight, or smudging with sage. Smudging with sage should be done daily, while the other two methods should only be done occasionally.
The safest way to cleanse Selenite is by submerging it in salt water for 24 hours before using it for crystal charging.
It will absorb any negative energy that may be lingering on it as well as leave it sparkling and feeling like new.
Another safe way to cleanse Selenite is to place it in sunlight for 4-8 hours.
Does Selenite need to be charged?
Selenite doesn’t need to be charged. However, some people choose to charge their
Selenite so that it will be more potent when used for protection or other purposes. Selenite crystals are made up of layers of Gypsum (calcium sulfate) on the surface of a Quartz crystal which is why they’re often referred to as Selenite Quartz.
The thin layer of Gypsum is easily broken down by water vapor in the air, which leads many people to believe that if you place your Selenite in direct sunlight for an extended period of time, it will charge the crystal with selenium from the sun’s rays.
One of the most common methods for charging Selenite is to bury it in moist soil for a few days.
You can also soak your crystal in purified water overnight, using only pure filtered water.
Are there other crystals that charge other crystals?
Charging absorbs energy from another source or imprints new information on the crystal.
This process can be done using various methods and materials, but selenite crystal is often used to clear negative energies in an environment.
But are there other crystals that charge other crystals? Quartz, emeralds, amethyst and citrine are all excellent options!
Alternatively, you could use intent with your intention to transfer the desired properties into your crystal of choice.
Another method would be to place one crystal next to another, thus transferring the vibrations.
A final approach would be to leave your crystal out in direct sunlight, where it will soak up the sun’s powerful rays.
Be mindful that this might not work well at night if no moonlight is available.
If you’re concerned about charging your crystal overnight, try placing it near a window during the day or inside your house under a lamp.
Final Words
You can charge crystals using various materials, but if you are looking for an easy way, try using Selenite.
Not only is it a natural material that won’t damage your crystals, but it also clears them of any negative energy.
To use Selenite to charge your crystals, you must ensure the selenite stone has been cleansed in salt water before placing it on top of the crystal.
In addition, this stone will give off a pleasant feeling and produce enough heat to clear away negative vibrations while simultaneously charging up positive energies.
Five safe and effective ways to charge crystals with Selenite!
The first step is to cleanse the selenite stone.
Next, place the Selenite over the desired crystal and then leave it there until the light from both stones matches each other, or they feel balanced.
Make sure to turn off any artificial light sources so you can see when the Selenite has charged the crystal. After about 5-10 minutes, remove the Selenite and let it rest overnight before cleansing again.
Amazing articles:
